On soldering on

Once upon a time, I soldered something together in school. At some point between then and now I made some stained glass windows and some small Tiffany style pieces. That kind of involves soldering, but with a huge soldering iron and a reel of lead/tin you could probably knock someone out with.
Since then, my life has been almost entirely solder-free, with any necessary soldering being done by other people.

Turns out becoming the owner of a raspberry pi involves not only learning how to speak ‘programming’ (;)), but also how to melt tiny things together.

***

My colleague offered to lend me a soldering iron which was very kind of him, but I decided, on reflection, that maybe soldering =/= soldering. Plumbing and pi-ing seem to be on different ends of a scale, or at least far enough apart to need to step back a bit to see both at the same time.

I went to look at new ones in DIY shops, but even the ones marked ‘suitable for electronics’ seemed huge compared to the pins I needed to connect.

In the end, my brother bought me one online.

This one is a bit longer and fatter than a biro, is fairly lightweight and has a set of changeable tips, almost, but not quite, as tiny as the pins that need soldering!
***

A couple of days’ mental build up, and a couple of hours later, I am proud (ish) to present (dum-dum-dah!) the results of my first electronic soldering:

It’s not a work of art, and it won’t win any prizes, but the pins are all attached to the board, and are recognisably separate from each other and not all melted together. I consider that a success..

Having let it all cool down, I inspected my labours… It seems I melted the plastic casing enough to push a few of the pins through towards the other side :(.

Here’s hoping it won’t matter! 🙂

One thought on “On soldering on

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.